Aeroelastic analysis of cantilever plates using Peters’ aerodynamic model,and the influence of choosing beam or plate theories as the structural model

In this paper, the aeroelastic analyses of a rectangular cantilever plate of varying aspect ratio is presented. The classical plate theory has been selected as the structural model. The main point that distinguishes this study from previously reported research is employing Peters’ theory to model aerodynamic effect which is not straightforward. The Peters’ aerodynamic model was originally developed to provide lift and moment, which is only applicable to the structural model based on the beam theories. In this study, using the basic concept of the Peters’ aerodynamic model in addition to utilizing the Fourier series, the pressure distribution is derived, which makes Peters’ model applicable to structural models based on plate theory. This combination provides a much simpler state–space aeroelastic model for plates in comparison to the prevalent panel methods, which could lead to a significant reduction in computational time. In addition, the aeroelastic response of the plate with respect to changes in the structural model from the beam theory to the plate theory is evaluated. By using data from an experiment carried out at Duke University, the theoretical results are evaluated. Furthermore, the differences in structural models obtained from the plate and beam theories can be divided into two distinct parts, which are responsible for differences in bending and torsional behaviors of the structure, separately. This approach enables us to measure the effects of differences of each behavior separately, which could provide with a new insight into the problem. It has been determined that the flutter speeds obtained from the beam and plate aeroelastic models are little affected by the difference in bending behavior, but rather is mainly caused by the difference in torsional frequencies.     

增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

基于非线性光纤环形镜的少模脉冲幅度调制再生器

随着网络带宽需求的快速增加,波分复用系统的容量已接近非线性香农极限.为了适应未来网络的发展,空分复用技术引起了越来越多的关注.本文首次提出基于少模非线性光纤环形镜(FM-NOLM)的脉冲幅度调制(PAM)全光再生器,描述了其工作原理和具体设计过程.采用COMSOL软件对组成FM-NOLM的硫化物高非线性光纤进行了模式特性仿真.以LP01,LP11,LP21三个光纤模式为例,确定了再生器的参数,计算出每个模式的功率转移函数曲线.仿真分析了该少模PAM-4全光再生器的噪声抑制(NRR)性能,并与单模情形进行了比较.研究表明,1)对于每个空间模式的PAM信号,所有再生电平具有一致的功率转移性能;2)当输入信噪比(SNR)约大于20 dB时,三种模式的噪声抑制比均可超过3 dB,并随着输入信噪比线性增加,其斜率约为1.2;3)在相同输入SNR条件下,三种模式的噪声抑制比相差不大,不超过1.1 dB.为了说明再生器的再生性能,当输入SNR为25 dB时,我们还给出了再生前后PAM-4信号的功率分布直方图.与现有的再生方案相比,本文方案的均匀多电平再生转移性能,使其更适合高频谱效率的长距空分复用系统和任意电平数的PAM信号再生.此外,该方案也能够扩展到波长域,有效提高光通信系统的传输容量.     

Fracture of a rectangular piezoelectromagnetic body

The singular stress, electric fields and magnetic fields in a rectangular piezoelectromagnetic body containing a center Griffith crack under longitudinal shear are obtained. Fourier transforms and Fourier sine series are used to reduce the mixed boundary value problems of the crack, which is assumed to be impermeable, to dual integral equations. The solution of the dual integral equations is then expressed in terms of Fredholm integral equations of the second kind. Expressions for stresses, electric displacements and magnetic inductions in the vicinity of the crack tip are derived. Also obtained are the field intensity factors and the energy release rates. Numerical results obtained show that the geometry of the rectangular body have significant influence on the field intensity factors and the energy release rates.     

光机械式红外探测器中镜面弯曲对探测灵敏度的影响(英文)

光学读出式红外成像技术是近年来研究的热点,本文讨论了镜面弯曲对光学检测灵敏度的影响。由双材料微悬臂梁组成的非致冷焦平面阵列通过体刻蚀工艺加工而成,由于残余应力的影响,制成的焦平面阵列将会发生弯曲,应力导致的镜面弯曲将会降低光学探测灵敏度。本文通过傅立叶光学模拟了镜面弯曲对光学探测灵敏度的影响,并通过实验验证了该模型。实验和模拟结果表明,在镜面曲率为0 .1mm-1时,光学探测灵敏度将会降低到理想情况的40 %。最后我们用这个模型评价了通过表面修饰来提高光学性能的效果。     

FJZ-1000型超高速转镜分幅相机及其应用

FJZ-1000型超高速转镜分幅相机最高摄影幅频为1107幅/s，画幅总数160幅，尺寸7.5 mm10 mm。光学系统中新加入场镜以使相机的所有画幅均完整成像，使相机摄影频率全面达到标称值的技术指标。配备了新型数字化微机控制台，使相机的操作更加方便，并且实现了两台气动相机的联合拍摄，与脉冲X光机也进行了联动实验。相机达到了设计技术性能指标，实验取得了满意的结果。     

Plasma in a high-frequency electric field with a reflective condition on the boundary

An analytical solution is obtained for the linearized problem of the behavior of a collisional gas plasma in a half-space in an external alternating electric field. It is assumed that the electrons are mirror-reflected from the plasma boundary. The solution is used for finding the screened field. The case of an external field frequency close to the plasma frequency is investigated separately.     

傅里叶变换红外光谱仪中动镜系统的设计

为提升傅里叶变换红外光谱仪的整体性能,基于立体角镜与平面镜组合的光学结构,设计了一种柔性支撑机构的摆动型动镜机构.建立和分析该机构控制模型,设计了相适应的反馈控制算法.结果表明:该结构具有无摩擦、抗震性好等优点;光学结构能够很好地补偿动镜摆动造成的倾斜与横移误差,保证仪器的重复性与稳定性;通过对控制算法参量的调整,动镜机构的扫描准确度优于98.4%.在4cm-1的光谱分辨率条件下,使用该动镜机构所测得的红外光谱信噪比优于80000:1,能够满足高准确度定量分析的要求.     

Quantum McKay Correspondence for Disc Invariants of Toric Calabi–Yau 3-orbifolds

We announce a result on quantum McK ay correspondence for disc invariants of outer legs in toric Calabi–Yau 3-orbifolds, and illustrate our method in a special example [C3/Z5(1, 1, 3)].     

纳秒激光诱导等离子体发射光谱中的自吸收效应

为了减小激光诱导等离子体发射光谱中光谱线的自吸收效应,提高激光光谱分析技术对物质中高含量元素的检测水平,实验采用了一种平面反射镜装置约束等离子体,比较了有或无平面反射镜装置时光谱线的线型变化。实验表明,在无平面反射镜装置时,样品元素Al,Mg和Mn的光谱线半高全宽度分别为0.16,0.24,0.058nm,而采用由四块平面反射镜组成的装置在空间上约束激光等离子体时分别为0.11,0.13,0.047nm。结果表明,光谱线的自吸收明显减小,谱线线型变得比较锐且强度显著提高。通过观测等离子体照片,测量等离子体温度和电子密度,分析讨论了激光光谱自吸收效应降低的原因。